automatic upgrade has failed - WARNING after installation

Ask your questions regarding TimeTrex installation here.
Post Reply
bafbes
Posts: 1
Joined: Sun Jul 27, 2014 8:36 am

automatic upgrade has failed - WARNING after installation

Post by bafbes »

I got the red warning message 20 minutes after the installation :

"WARNING: TimeTrex automatic upgrade has failed due to a system error! Please contact your TimeTrex administrator immediately to re-run the TimeTrex installer to correct the issue."

I am not interested at this moment by automatic upgrade nor by this kind of message that one cannot remove.

I set disable_auto_upgrade = TRUE in timetrex.inc.php with no result.

I have installed timetrex 3.7.8 autoinstaller for windows.

Any Idea would be helpful.
shaunw
Posts: 7839
Joined: Tue Sep 19, 2006 2:22 pm

Re: automatic upgrade has failed - WARNING after installatio

Post by shaunw »

That error message will only go away once the installer has been run successfully from start to finish again.

If the automated upgrade failed though, there is likely a problem with your installation and its quite likely the reason will cause other failures too, so I wouldn't be surprised if you start seeing other error messages appearing eventually.
Post Reply